SENTRySCOUT Developers Kit
The SENTRySCOUT Assured Positioning, Navigation & Timing System, based on the US Army's Mounted APNT System MAPS GEN-1, provides trusted and reliable Positioning, Navigation and Timing data, independent of the availability or integrity of GPS signals.
SENTRySCOUT brings Assured PNT to the forefront by validating GPS signals. It
creates and disseminates IS-GPS-153 messages when GPS is denied or unreliable, conveying data via Ethernet and serial clients. SENTRySCOUT
continuously distributes valid PNT data to all vehicle clients using Ethernet (VICTORY) and serial protocols.
ED3
ED3 or E-FLO-G are COTS products providing SAASM or M-Code protected GPS data that is depot level upgradeable from SAASM to M-Code. ED3 or E-FLO-G with VCAM installed retains 100% compatibility with all standard DAGR mount accessories and occupies the same space claim as the DAGR.
(J1) Key fill/COM3 port (replicates DAGR J1)
(J2) Configuration Utility/Diagnostics Port
(J2 - X) Each of the 4 ports independently replicate DAGR J2 (supports up to 8
individual clients). Each port distributes independent IS-GPS-153 and MSID
messages via COM1 (RS232) and COM2 (configurable RS232 or RS422); PPS
(1PPS UTC, 10PPS UTC & T-Mark); HAVEQUICK. Supports clients such
as Tactical radios, FBCB2/BFT, Laptop/ Falconview, MRT’s, etc.
(J3) AJ or FRPA Antenna - Enhanced compatibility with AJ antennas operating
in any mode;
(J4) 28VDC Switched Vehicle Power (Required); 28VDC Auxiliary Backup Power (Optional)
VICTORY CSAC Accessory Module
VICTORY CSAC Accessory Module (VCAM) is an optional module from GPS Source's existing family of solutions that fall under the Enhanced D3 product line. The VCAM integrates various non-GPS sensors to support a complete positioning, navigation, and timing (PNT) assurance capability. Designed as an open system, it allows integration of other products that support non-GPS solutions for PNT including an Inertial Navigation System (INS), Chip Scale Atomic Clock (CSAC) and software designed for electronic surveillance / electronic protection (ES/EP). Cutting edge VCAM technology integrates all timing and positioning solutions into one entity, allowing for seamless change from one source of timing data to another.
FRPA Antenna
The FRPA-3EW is a professional grade, high performance, wider band GNSS active antenna designed for the demanding high signal levels of the electronic warfare environment. It is small and lightweight, with exceptional protection against the elements.
Designed to support the warfighter, the portable, yet precise FRPA-3EW antenna is built for tough applications and includes an LNA with high linearity performance. The radome is made of a high-grade polymer, with a design to protect from UV, rain, lightning, chemical and jet fuels. The FRPA-3EW is available with a bottom mount connector and multiple colors (per FED-STD-595B).
Anti-Jam Antenna Integration Module (AJAIM)
The Anti-Jam Antenna Integration Module (AJAIM) is a military qualified, two-input four-output Anti-Jam Antenna System (AJAS) and Fixed Radiation Pattern Antenna (FRPA) integration module. This module enables the RF input to an Assured Position, Navigation and Timing (APNT) system to be switched between an AJ and FRPA. The AJAIM also switches the vehicle battery power to the AJAS depending on the needs of the connected APNT system, thereby creating a low power mode based on using only the FPRA input. The AJAIM with its four RF outputs supports dual APNT systems that require a classified enclave and an unclassified enclave. Equipped with a Built In Test (BIT) which works in conjunction with the connected APNT system, the AJAIM is capable of monitoring the health of the antenna system. Alternatively, the AJAIM is designed to provide high jammer isolation to the APNT system in hostile environments.
The SENTRySCOUT system is designed to accept additional input from an Inertial Navigation System (INS) and anti-jam antenna for increased PNT assurance capability and redundancy. Please contact GPS Source for product availability and recommendations.
Technical Support
10 Hours of support including training and installation services. Contact us for other cost-effective support services plans.
Kit Includes
- ED3 or E-FLO-G with Contractor Furnished GB-GRAM
- VICTORY CSAC Accessory Module - VCAM
- FRPA Antenna
- Anti-Jam Antenna Integration Module - AJAIM
- FLOtalkTM Software
- Quick Start Guide
- Power and Connector Cables
- 10 Hours of Technical Support, Training, Installation Service, and Maintenance
Technical Data
SENTRySCOUT Brochure
Ordering Information
For customized quotes and help with system design, call or email GPSS-Sales@gd-ms.com today. We can also answer any questions regarding product pricing, customized options, specifications, or technical support issues.
Contact Us for lead time and pricing.
For Quotes or Ordering, call +1 719-421-7300 or email GPSS-Sales@gd-ms.com today for product pricing, available options, questions, or technical support
